⚖️ Mass → Volume ConversionDensity: 1.35 kg/L
Kg to Litres: Latex Wall Paint
Convert kilograms of paint to litres. Architectural emulsion density ranges from 1.200 to 1.500 kg/L based on pigment solids (1 kg = 0.667 to 0.833 L).
Enter weight to convert
kg
Presets:
700+ Available
▼
Enter density in kg/L (water = 1.000 kg/L)
- Reference Density
- 0.784 kg/L
- Density Range
- 0.760–0.808 kg/L
- Standard Temp
- 20°C
- Active Formula
- V = m ÷ ρ
Density values are approximate and usually based on room temperature, around 20°C, unless otherwise stated.
Verified Material Specification & StandardReviewed August 2026
Standard CitationASTM D1475 Standard Test Method for Density of Liquid Coatings
Reference Density1.350 kg/L (g/cm³)
Standard Temperature20°C Standard
Temperature vs. Density Curve for Latex Wall Paint
How thermal expansion alters physical density and volume per kg.
| Operating Temperature | Estimated Density | 1 kg Volume (L) | 1 Litre Mass (kg) |
|---|---|---|---|
| 0°C (Cold / Winter) | 1.357 kg/L | 0.737 L | 1.357 kg |
| 20°C (Standard Reference) | 1.350 kg/L | 0.741 L | 1.350 kg |
| 40°C (Process Heat / Summer) | 1.343 kg/L | 0.744 L | 1.343 kg |
| 80°C (Elevated Temperature) | 1.330 kg/L | 0.752 L | 1.330 kg |
How to Calculate Kg to Litres for Latex Wall Paint
To calculate the volume in litres from a known mass of Latex Wall Paint, divide the mass in kilograms by the substance density:
Volume (L) = Mass (kg) ÷ 1.35 kg/L
1 Litre Mass1 L = 1.350 kg1350 grams per litre
1 Kilogram Volume1 kg = 0.741 L741 mL per kilogram
Latex Wall Paint Kg to Litres Conversion Table
| Mass (Kilograms) | Calculated Volume (Litres) | Millilitres (mL) |
|---|---|---|
| 1 kg | 0.741 L | 740.7 mL |
| 2 kg | 1.481 L | 1,481.5 mL |
| 5 kg | 3.704 L | 3,703.7 mL |
| 10 kg | 7.407 L | 7,407.4 mL |
| 20 kg | 14.815 L | 14,814.8 mL |
| 25 kg | 18.519 L | 18,518.5 mL |
| 50 kg | 37.037 L | 37,037 mL |
| 100 kg | 74.074 L | 74,074.1 mL |
| 200 kg | 148.148 L | 148,148.1 mL |
| 1000 kg | 740.741 L | 740,740.7 mL |
Real-World Industry Applications for Latex Wall Paint
Matte ceiling paints have heavy mineral loading and high density (~1.45–1.50 kg/L), whereas satin and gloss finishes have higher resin content and lower density (~1.20–1.30 kg/L).
Engineering Specification: 1.200 to 1.500 kg/L depending on pigment loading (TiO2 / chalk) and gloss level
Interactive Density Behavior
Mass
1.00
kg÷
1.00 kg/L
Water
Volume
1.000
LitresVolume
1.00 L of liquid
Frequently Asked Questions
Common practical questions for converting Latex Wall Paint.
Why is paint so much heavier than water?+
Mineral pigments such as titanium dioxide (density 4.2 kg/L) and calcium carbonate fillers significantly raise the liquid emulsion density.
How many litres is 1 kg of paint?+
1 kg of wall paint equals approximately 0.741 litres (741 mL).